LUNA Strong Base

Strong base is a solid base, similar in properties to gel.

Features:

• Suitable for thin and brittle nails (short and medium length up to 5 mm free edge). This base is not suitable for long and curled nails.
• Makes nails hard and strong.
• Weakly acidic 5-6 pH.
• The consistency is medium-liquid, which allows you to make alignment in a few seconds.
• Does not flow and self-levels very quickly.
• Can emit heat and burn on traumatized and very thin nails. This base does not burn on healthy nails.
• It is well removed both by sawing and by liquid.
• The basic rule for leveling is that the thickness should be 1-1.5 mm on the end.
• Has 3 properties: base, gel and top.
• Hypoallergenic.
• If you erase the stickiness from this base, then you can not cover it with a top coat, it has a good gloss.
• The power of the drying lamp is 48 W (it should be only the original lamp).
• Before applying Strong base, it is important to give a layer of elastic Rubber base. It is best to use Lunamoon Rubber base.

Application method:
1. Removal.
2. We do not dust the shape of the nail. Or we leave a spare 2 mm of length, which we dust and take away after leveling.
3. With a file of 220 grit, file the nail from above without strong pressure, lifting the scales of the nail plate, or use a buff of 100 grit.
4. Manicure.
5. If you work with removers, you need to wash your hands with soap and water after using them.
6. Nail degreasing. It is necessary to make two approaches. We use 4 napkins. One napkin for 5 fingers. The first approach is to wipe the surface of the nail. The second approach is to take an orange stick, put on a napkin and wipe everything in the cuticle area and in the sinuses.
7. Dehydrator (optional)
8. We use the primer as desired. But if the base for the substrate has sufficient acidity, then a primer is not needed.
9. Lining with Rubber base Lunamoon. Best applied with a flat gel brush. Movements should be rubbing. It is important to draw all sinuses of the nail. Dry for 30 seconds.
10. Wipe off stickiness.
11. Strong base alignment. Dry in the lamp for 60 seconds.
13. If the nail was thin, it can twist, so it is necessary to file 1 mm of the natural nail from the middle. Then there will be no exfoliation, because if the material is hard and the nail is very soft, the nail itself will begin to lag behind the hard material from the free edge.
14. After dusting, wipe off the stickiness and cover with gel polish or camouflage base in a thin layer.
15. Apply top coat and dry for 120 seconds. After drying, do not wipe with anything, because the shine may be lost.
(Photos of the product on the website may differ from the real product)